MULSS—Multiply Scalar Single-Precision Floating-Point Values

Opcode/Instruction Op /En 64/32 bit Mode Support CPUID Feature Flag Description

F3 0F 59 /r

MULSS xmm1,xmm2/m32

RM V/V SSE Multiply the low single-precision floating-point value in xmm2/m32 by the low single-precision floating-point value in xmm1.

VEX.NDS.128.F3.0F.WIG 59 /r

VMULSS xmm1,xmm2, xmm3/m32

RVM V/V AVX Multiply the low single-precision floating-point value in xmm3/m32 by the low single-precision floating-point value in xmm2.

EVEX.NDS.LIG.F3.0F.W0 59 /r

VMULSS xmm1 {k1}{z}, xmm2, xmm3/m32 {er}

T1S V/V AVX512F Multiply the low single-precision floating-point value in xmm3/m32 by the low single-precision floating-point value in xmm2.

Instruction Operand Encoding

Op/En Operand 1 Operand 2 Operand 3 Operand 4
RM ModRM:reg (r, w) ModRM:r/m (r) NA NA
RVM ModRM:reg (w) VEX.vvvv (r) ModRM:r/m (r) NA
T1S ModRM:reg (w) EVEX.vvvv (r) ModRM:r/m (r) NA

Description

Multiplies the low single-precision floating-point value from the second source operand by the low single-precision floating-point value in the first source operand, and stores the single-precision floating-point result in the destina-tion operand. The second source operand can be an XMM register or a 32-bit memory location. The first source operand and the destination operands are XMM registers.

128-bit Legacy SSE version: The first source operand and the destination operand are the same. Bits (MAX_VL-1:32) of the corresponding YMM destination register remain unchanged.

VEX.128 and EVEX encoded version: The first source operand is an xmm register encoded by VEX.vvvv. The three high-order doublewords of the destination operand are copied from the first source operand. Bits (MAX_VL-1:128) of the destination register are zeroed.

EVEX encoded version: The low doubleword element of the destination operand is updated according to the writemask.

Software should ensure VMULSS is encoded with VEX.L=0. Encoding VMULSS with VEX.L=1 may encounter unpre-dictable behavior across different processor generations.

Operation

VMULSS (EVEX encoded version)

IF (EVEX.b = 1) AND SRC2 *is a register*

THEN

SET_RM(EVEX.RC);

ELSE

SET_RM(MXCSR.RM);

FI;

IF k1[0] or *no writemask*

THEN

DEST[31:0] (cid:197) SRC1[31:0] * SRC2[31:0]

ELSE

IF *merging-masking*

; merging-masking

THEN *DEST[31:0] remains unchanged*

ELSE

; zeroing-masking

THEN DEST[31:0] (cid:197) 0

FI

FI;

ENDFOR

DEST[127:32] (cid:197) SRC1[127:32]

DEST[MAX_VL-1:128] (cid:197) 0

VMULSS (VEX.128 encoded version)

DEST[31:0] (cid:197)SRC1[31:0] * SRC2[31:0]

DEST[127:32] (cid:197)SRC1[127:32]

DEST[MAX_VL-1:128] (cid:197)0

MULSS (128-bit Legacy SSE version)

DEST[31:0] (cid:197)DEST[31:0] * SRC[31:0]

DEST[MAX_VL-1:32] (Unmodified)

Intel C/C++ Compiler Intrinsic Equivalent

VMULSS __m128 _mm_mask_mul_ss(__m128 s, __mmask8 k, __m128 a, __m128 b);

VMULSS __m128 _mm_maskz_mul_ss( __mmask8 k, __m128 a, __m128 b);

VMULSS __m128 _mm_mul_round_ss( __m128 a, __m128 b, int);

VMULSS __m128 _mm_mask_mul_round_ss(__m128 s, __mmask8 k, __m128 a, __m128 b, int);

VMULSS __m128 _mm_maskz_mul_round_ss( __mmask8 k, __m128 a, __m128 b, int);

MULSS __m128 _mm_mul_ss(__m128 a, __m128 b)

SIMD Floating-Point Exceptions

Underflow, Overflow, Invalid, Precision, Denormal

Other Exceptions

Non-EVEX-encoded instruction, see Exceptions Type 3.

EVEX-encoded instruction, see Exceptions Type E3.