MOVMSKPD—Extract Packed Double-Precision Floating-Point Sign Mask

Opcode/Instruction	Op/En	64/32-bit Mode	CPUID Feature Flag	Description
66 0F 50 /r MOVMSKPD reg, xmm	RM	V/V	SSE2	Extract 2-bit sign mask from xmm and store in reg. The upper bits of r32 or r64 are filled with zeros.
VEX.128.66.0F.WIG 50 /r VMOVMSKPD reg, xmm2	RM	V/V	AVX	Extract 2-bit sign mask from xmm2 and store in reg. The upper bits of r32 or r64 are zeroed.
VEX.256.66.0F.WIG 50 /r VMOVMSKPD reg, ymm2	RM	V/V	AVX	Extract 4-bit sign mask from ymm2 and store in reg. The upper bits of r32 or r64 are zeroed.

Opcode/Instruction

Op/En

64/32-bit Mode

CPUID Feature Flag

Description

66 0F 50 /r

MOVMSKPD reg, xmm

V/V

SSE2

Extract 2-bit sign mask from xmm and store in reg. The upper bits of r32 or r64 are filled with zeros.

VEX.128.66.0F.WIG 50 /r

VMOVMSKPD reg, xmm2

V/V

AVX

Extract 2-bit sign mask from xmm2 and store in reg. The upper bits of r32 or r64 are zeroed.

VEX.256.66.0F.WIG 50 /r

VMOVMSKPD reg, ymm2

V/V

AVX

Extract 4-bit sign mask from ymm2 and store in reg. The upper bits of r32 or r64 are zeroed.

Instruction Operand Encoding

Op/En	Operand 1	Operand 2	Operand 3	Operand 4
RM	ModRM:reg (w)	ModRM:r/m (r)	NA	NA

Description

Extracts the sign bits from the packed double-precision floating-point values in the source operand (second operand), formats them into a 2-bit mask, and stores the mask in the destination operand (first operand). The source operand is an XMM register, and the destination operand is a general-purpose register. The mask is stored in the 2 low-order bits of the destination operand. Zero-extend the upper bits of the destination.

In 64-bit mode, the instruction can access additional registers (XMM8-XMM15, R8-R15) when used with a REX.R prefix. The default operand size is 64-bit in 64-bit mode.

128-bit versions: The source operand is a YMM register. The destination operand is a general purpose register.

VEX.256 encoded version: The source operand is a YMM register. The destination operand is a general purpose register.

Note: In VEX-encoded versions, VEX.vvvv is reserved and must be 1111b, otherwise instructions will #UD.

Operation

(V)MOVMSKPD (128-bit versions)

DEST[0] (cid:197) SRC[63]
DEST[1] (cid:197) SRC[127]
IF DEST = r32
    THEN DEST[31:2] (cid:197) 0;
    ELSE DEST[63:2] (cid:197) 0;
FI

VMOVMSKPD (VEX.256 encoded version)

DEST[0] (cid:197) SRC[63]
DEST[1] (cid:197) SRC[127]
DEST[2] (cid:197) SRC[191]
DEST[3] (cid:197) SRC[255]
IF DEST = r32
    THEN DEST[31:4] (cid:197) 0;
    ELSE DEST[63:4] (cid:197) 0;
FI

Intel C/C++ Compiler Intrinsic Equivalent

MOVMSKPD:

int _mm_movemask_pd ( __m128d a)

VMOVMSKPD:

_mm256_movemask_pd(__m256d a)

SIMD Floating-Point Exceptions

None

Other Exceptions

See Exceptions Type 7; additionally

#UD	If VEX.vvvv ≠ 1111B.