MAXSS—Return Maximum Scalar Single-Precision Floating-Point Value

Opcode/Instruction Op /En 64/32 bit Mode Support CPUID Feature Flag Description
F3 0F 5F /r MAXSS xmm1, xmm2/m32 RM V/V SSE Return the maximum scalar single-precision floating-point value between xmm2/m32 and xmm1.
VEX.NDS.128.F3.0F.WIG 5F /r VMAXSS xmm1, xmm2, xmm3/m32 RVM V/V AVX Return the maximum scalar single-precision floating-point value between xmm3/m32 and xmm2.
EVEX.NDS.LIG.F3.0F.W0 5F /r VMAXSS xmm1 {k1}{z}, xmm2, xmm3/m32{sae} T1S V/V AVX512F Return the maximum scalar single-precision floating-point value between xmm3/m32 and xmm2.

Instruction Operand Encoding

Op/En Operand 1 Operand 2 Operand 3 Operand 4
RM ModRM:reg (r, w) ModRM:r/m (r) NA NA
RVM ModRM:reg (w) VEX.vvvv ModRM:r/m (r) NA
T1S ModRM:reg (w) EVEX.vvvv ModRM:r/m (r) NA

Description

Compares the low single-precision floating-point values in the first source operand and the second source operand, and returns the maximum value to the low doubleword of the destination operand.

If the values being compared are both 0.0s (of either sign), the value in the second source operand is returned. If a value in the second source operand is an SNaN, that SNaN is returned unchanged to the destination (that is, a QNaN version of the SNaN is not returned).

If only one value is a NaN (SNaN or QNaN) for this instruction, the second source operand, either a NaN or a valid floating-point value, is written to the result. If instead of this behavior, it is required that the NaN from either source operand be returned, the action of MAXSS can be emulated using a sequence of instructions, such as, a comparison followed by AND, ANDN and OR.

The second source operand can be an XMM register or a 32-bit memory location. The first source and destination operands are XMM registers.

128-bit Legacy SSE version: The destination and first source operand are the same. Bits (MAX_VL:32) of the corre-sponding destination register remain unchanged.

VEX.128 and EVEX encoded version: The first source operand is an xmm register encoded by VEX.vvvv. Bits (127:32) of the XMM register destination are copied from corresponding bits in the first source operand. Bits (MAX_VL:128) of the destination register are zeroed.

EVEX encoded version: The low doubleword element of the destination operand is updated according to the writemask.

Software should ensure VMAXSS is encoded with VEX.L=0. Encoding VMAXSS with VEX.L=1 may encounter unpre-dictable behavior across different processor generations.

Operation

MAX(SRC1, SRC2)

{

IF ((SRC1 = 0.0) and (SRC2 = 0.0)) THEN DEST (cid:197)SRC2;

ELSE IF (SRC1 = SNaN) THEN DEST (cid:197)SRC2; FI;

ELSE IF (SRC2 = SNaN) THEN DEST (cid:197)SRC2; FI;

ELSE IF (SRC1 > SRC2) THEN DEST (cid:197)SRC1;

ELSE DEST (cid:197)SRC2;

FI;

}

VMAXSS (EVEX encoded version)

IF k1[0] or *no writemask*

THEN

DEST[31:0] (cid:197) MAX(SRC1[31:0], SRC2[31:0])

ELSE

IF *merging-masking*

; merging-masking

THEN *DEST[31:0] remains unchanged*

ELSE

; zeroing-masking

THEN DEST[31:0] (cid:197) 0

FI;

FI;

DEST[127:32] (cid:197) SRC1[127:32]

DEST[MAX_VL-1:128] (cid:197) 0

VMAXSS (VEX.128 encoded version)

DEST[31:0] (cid:197)MAX(SRC1[31:0], SRC2[31:0])

DEST[127:32] (cid:197)SRC1[127:32]

DEST[MAX_VL-1:128] (cid:197)0

MAXSS (128-bit Legacy SSE version)

DEST[31:0] (cid:197)MAX(DEST[31:0], SRC[31:0])

DEST[MAX_VL-1:32] (Unmodified)

Intel C/C++ Compiler Intrinsic Equivalent

VMAXSS __m128 _mm_max_round_ss( __m128 a, __m128 b, int);

VMAXSS __m128 _mm_mask_max_round_ss(__m128 s, __mmask8 k, __m128 a, __m128 b, int);

VMAXSS __m128 _mm_maskz_max_round_ss( __mmask8 k, __m128 a, __m128 b, int);

MAXSS __m128 _mm_max_ss(__m128 a, __m128 b)

SIMD Floating-Point Exceptions

Invalid (Including QNaN Source Operand), Denormal

Other Exceptions

Non-EVEX-encoded instruction, see Exceptions Type 3.

EVEX-encoded instruction, see Exceptions Type E3.