| Opcode/Instruction | Op /En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
|---|---|---|---|---|
| 66 0F 3A 17 /r ib EXTRACTPS reg/m32, xmm1, imm8 | RMI | VV | SSE4_1 | Extract one single-precision floating-point value from xmm1 at the offset specified by imm8 and store the result in reg or m32. Zero extend the results in 64-bit register if applicable. |
| VEX.128.66.0F3A.WIG 17 /r ib VEXTRACTPS reg/m32, xmm1, imm8 | RMI | V/V | AVX | Extract one single-precision floating-point value from xmm1 at the offset specified by imm8 and store the result in reg or m32. Zero extend the results in 64-bit register if applicable. |
| EVEX.128.66.0F3A.WIG 17 /r ib VEXTRACTPS reg/m32, xmm1, imm8 | T1S | V/V | AVX512F | Extract one single-precision floating-point value from xmm1 at the offset specified by imm8 and store the result in reg or m32. Zero extend the results in 64-bit register if applicable. |
| Op/En | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
| RMI | ModRM:r/m (w) | ModRM:reg (r) | Imm8 | NA |
| T1S | ModRM:r/m (w) | ModRM:reg (r) | Imm8 | NA |
Extracts a single-precision floating-point value from the source operand (second operand) at the 32-bit offset spec-ified from imm8. Immediate bits higher than the most significant offset for the vector length are ignored.
The extracted single-precision floating-point value is stored in the low 32-bits of the destination operand
In 64-bit mode, destination register operand has default operand size of 64 bits. The upper 32-bits of the register are filled with zero. REX.W is ignored.
VEX.128 and EVEX encoded version: When VEX.W1 or EVEX.W1 form is used in 64-bit mode with a general purpose register (GPR) as a destination operand, the packed single quantity is zero extended to 64 bits.
VEX.vvvv/EVEX.vvvv is reserved and must be 1111b otherwise instructions will #UD.
128-bit Legacy SSE version: When a REX.W prefix is used in 64-bit mode with a general purpose register (GPR) as a destination operand, the packed single quantity is zero extended to 64 bits.
The source register is an XMM register. Imm8[1:0] determine the starting DWORD offset from which to extract the 32-bit floating-point value.
If VEXTRACTPS is encoded with VEX.L= 1, an attempt to execute the instruction encoded with VEX.L= 1 will cause an #UD exception.
VEXTRACTPS (EVEX and VEX.128 encoded version)
SRC_OFFSET (cid:197) IMM8[1:0]
IF (64-Bit Mode and DEST is register)
DEST[31:0] (cid:197) (SRC[127:0] >> (SRC_OFFSET*32)) AND 0FFFFFFFFh
DEST[63:32] (cid:197) 0
ELSE
DEST[31:0] (cid:197) (SRC[127:0] >> (SRC_OFFSET*32)) AND 0FFFFFFFFh
FI
EXTRACTPS (128-bit Legacy SSE version)
SRC_OFFSET (cid:197)IMM8[1:0]
IF (64-Bit Mode and DEST is register)
DEST[31:0] (cid:197)(SRC[127:0] >> (SRC_OFFSET*32)) AND 0FFFFFFFFh
DEST[63:32] (cid:197)0
ELSE
DEST[31:0] (cid:197)(SRC[127:0] >> (SRC_OFFSET*32)) AND 0FFFFFFFFh
FI
EXTRACTPS int _mm_extract_ps (__m128 a, const int nidx);
None
| VEX-encoded instructions, see Exceptions Type 5; Additionally |
| EVEX-encoded instructions, see Exceptions Type E9NF. |
| IF VEX.L = 0. |
| If VEX.vvvv != 1111B or EVEX.vvvv != 1111B. |